"Bandit" (2bandit)
10/20/2013 at 12:24 • Filed to: emma
0
9|
"Bandit" (2bandit)
10/20/2013 at 12:24 • Filed to: emma | 0
| 9 |
Can I run an edelbrock performer carb on a stock pontiac manifold without any modifications? I can't tell.
Corson Currently Coupein' It
> Bandit
10/20/2013 at 12:32 |
|
I'm assuming you don't have both parts readily available, or you'd just drop it on and see right?
desertdog5051
> Bandit
10/20/2013 at 12:46 |
|
Call and ask. 800-416-8628 tech line.
lone_liberal
> Bandit
10/20/2013 at 13:30 |
|
It would have to be a spread bore model, if the Poncho originally had a Rochester carb. Also, most carbs are factory tuned for a SBC so you might have to adjust it a bit.
|
Bandit
> lone_liberal
10/20/2013 at 13:36 |
|
Thanks! Looks like I will have to get an adapter.
|
lone_liberal
> Bandit
10/20/2013 at 13:39 |
|
It might be easier to get a spread bore Holley if you aren't married to the idea of an Edelbrock. No adapter needed.
BJohnson11
> Bandit
10/20/2013 at 14:07 |
|
My edelbrock performer came with both square bore and spread bore patterns, so you should be able to. Either call (tech line takes forever) or if you go online to summit or wherever you're buying it from, it'll tell you if it has a square bore or spread bore or both bolt pattern.
matthewklein220
> Bandit
10/20/2013 at 15:41 |
|
I believe Holley's double-pumper fits the stock manifold, I'd have to double check.
|
Bandit
> matthewklein220
10/20/2013 at 16:10 |
|
Thanks! I just bought and installed a square bore to spread bore adapter.
|
matthewklein220
> Bandit
10/21/2013 at 11:52 |
|
That works too!